FAQ Keyz Thallium
Yes, you have 5 spare switches to change the switches on your keyboard.
-
First remove your key with the black pliers, then remove the red switch with the metal pliers (clip the pliers onto the white ends of the switch).
-
Then reclip the switch and key.
Simply install the software here: https://www.the-g-lab.tech/wp-content/uploads/2023/08/keyz-Thallium-v2.zip The keyboard is 100% customizable, and here’s a tutorial to show you how to make the settings: https://www.youtube.com/watch?v=imaHIRvJ8HQ
The use of macros requires the software, which is only available on Windows.
They will therefore not be compatible with the console.
No, we recommend using only the red switches supplied with the keyboard.
If you need additional switches, please contact us at: support@axs-group.com
If you need additional switches, please contact us at: support@axs-group.com
The FN+INS combination lets you change backlight effects from among those included with the keyboard.
Backlighting is also fully customizable via software.
- Try the following combination, which will reset the keyboard and may solve your problem: – FN + ESC
- Check that your keyboard brightness is set to maximum by pressing FN + Page Up.
- Restore your keyboard from the software
- Try the following combination, which will reset the keyboard and may solve your problem: FN + ESCAPE
-
Check the switch status of your key.
To do this, remove the key to access the switch.
Then, using the tip of a pen, press each of the 4 corners of the switch on the colored part to check that the switch is engaged. -
Restore your keyboard from the software.
We do not sell key sets separately, and we do not guarantee that keys purchased from a third-party vendor will be compatible.
If your keyboard is still under warranty, contact our customer service department for free replacement of several keys.