FAQ Keyz Carbon E
The combinations Fn+1, 2, 3, 4, 5 and 6 give access to all game effects.
Use Fn+INS to navigate between backlight effects.
You can find the list in the manual here: https: //www.the-g-lab.tech/wp-content/uploads/Manuel-KEYZ-CARBON-E-1.pdf
- Check that the light is on by pressing the “On/off ☼” button.
- Increase lighting intensity with Fn + Page Up
- Try the following combination, which will reset the keyboard and may solve your problem: – FN + ESC
- Remove the key to check the switch and key status
- Test the following procedure:
- Remove the button to access the switch
- Using the tip of a pen, press down on each of the 4 corners of the switch on the colored part to check that the switch is properly engaged.
Press Fn+Z to swap WASD keys and arrow keys, and vice versa.
Pressing Fn+Windows activates the “Windows Lock” function, which locks the Windows key (very useful in games!). Repeat Fn+Windows to deactivate Windows Lock.
- Check that your computer is switched off and not in hibernation mode.
- Check your USB port power settings from your control panel
- In your computer’s boot bios, check the power options for your USB ports
We do not sell key sets separately, and we do not guarantee that keys purchased from a third-party vendor will be compatible. You can contact our customer service department for free replacement of several keys.
Our mechanical keyboards feature soldered switches. They are not designed to be removed and exchanged.
This product is plug and play. In other words, it has no customization software. Plug in and enjoy your purchase immediately.
