FAQ K-Pad Thorium
It is also possible that the peripheral is called “Xbox 360 peripheral”.
Rest assured, not all unofficial Sony controllers are recognized as PS3 controllers.
This does not prevent the controller from working.
You may be experiencing a problem with your controller, particularly with the Windows error code 43.
Here’s how to solve the problem.
– Open Settings – Open Device Manager – Unfold the USB bus controllers tab – If any USB hubs, controllers or storage devices show a “!” signal in a yellow triangle, right-click Disable then Enable
The gamepad has the Dinput and Xinput functions on the computer, so you can change them freely depending on the game.
The gamepad is set to Xinput mode by default, so LED 1 remains lit.
In Dinput status, there are two modes: analog and digital.
The gamepad is set to Digital mode by default in Dinput mode, LED 1 remains lit.
Press the Home button for 5 seconds, the gamepad switches from digital to analog mode, LED1 and LED2 remain lit.
Press the Home button for one second, and the gamepad returns to Digital mode.
- Make sure you use it on either PC or PS3
- Make sure you install the driver: https: //www.the-g-lab.tech/wp-content/uploads/2021/07/Driver-Thorium.zip
- Press the HOME button for 5 seconds
- Press the central button on the joystick for 5 seconds after plugging it in.
- Install the attached driver.https://www.the-g-lab.tech/wp-content/uploads/2021/07/Driver-Thorium.zip
Joystick vibrations react to game action.
They are not adjustable.
You must enable/disable them in your game settings.
