Plug in the controller for 2 hours using the original charging cable.
FAQ K-Pad Thorium WL
- Press the central button on the joystick for 5 seconds after plugging it in.
- Insert a pin in the hole at the back of the joystick
- update your computer?
(what version of Windows are you using?) - Install the driver https://www.the-g-lab.tech/wp-content/uploads/2021/07/Driver-Thorium.zip
Please look carefully at the packaging.
The dongle is not inside the controller.
It is also possible that the peripheral is called “Xbox 360 peripheral”.
Rest assured, not all unofficial Sony controllers are recognized as PS3 controllers.
This does not prevent the controller from working.
You may be experiencing a problem with your controller, particularly with the Windows error code 43.
Here’s how to solve the problem.
– Open Settings – Open Device Manager – Unfold the USB bus controllers tab – If any USB hubs, controllers or storage devices show a “!” signal in a yellow triangle, right-click Disable then Enable
- Make sure you use it on either PC or PS3
- Make sure you install the driver: https://www.the-g-lab.tech/wp-content/uploads/2021/07/Driver-Thorium.zip
- Unplug the dongle and press the HOME button for 5 seconds, then plug it back in.
The gamepad has the Dinput and Xinput functions on the computer, so you can change them freely depending on the game.
The gamepad is set to Xinput mode by default, so LED 1 remains lit.
In Dinput status, there are two modes: analog and digital.
The gamepad is set to Digital mode by default in Dinput mode, LED 1 remains lit.
Press the Home button for 5 seconds, the gamepad switches from digital to analog mode, LED1 and LED2 remain lit.
Press the Home button for one second, and the gamepad returns to Digital mode.
Joystick vibrations react to game action.
They are not adjustable.
You must enable/disable them in your game settings.
